Residential · Bradenton, FL
When an old floor coating peels, bubbles, or stays slick, recoating without proper epoxy removal just locks in failure. Elite Epoxy Bradenton has served Bradenton since 2019, stripping failed coatings and rebuilding floors with the right grind profile, primers, and industrial-grade epoxy systems.
Successful epoxy removal starts with inspection and testing, not guesswork. We check adhesion, moisture-vapor transmission risk, and any contamination from tire plasticizers, oils, or silicone, then choose the safest removal method for your slab and space. Most projects use mechanical grinding with dust-controlled equipment (HEPA vacuums) to reach clean, sound concrete and the correct Concrete Surface Profile (typically CSP 2-3 for coatings, higher for heavy-build systems). Cracks, spalls, and control joints are repaired with epoxy gel, polyurea, or polymer-modified patching compounds, and we confirm the floor is flat enough for your intended finish before primers go down.
Bradenton’s humidity and sudden wet weather can affect cure windows, moisture, and surface cleanliness, so we build the system around local conditions. If the slab shows elevated moisture, we can install a moisture-mitigation epoxy primer before the build coat, then apply 100% solids epoxy or a hybrid system based on traffic, chemicals, and UV exposure. In garages, we commonly finish with a polyaspartic or aliphatic urethane topcoat for abrasion resistance, hot-tire pickup resistance, and better color stability. Options include full broadcast vinyl flake floors, quartz systems for slip resistance, solid-color epoxy with a satin or gloss topcoat, and cove base details for commercial cleaning.
Bradenton customers choose us because we treat epoxy removal as a concrete-restoration job, not a quick recoat. You get a written scope that spells out the grinding level, crack and joint plan, material specs (primer, build coat, broadcast, topcoat), and cure times, so expectations are clear before we start. Our crews use commercial grinders, shot blasting when required, and controlled-mixing methods to hit proper ratios and avoid soft spots and roller marks. We are licensed and insured, and we keep the jobsite clean with dust control and staged work areas to reduce downtime for homes and businesses.
Before we wrap, we do a final walkthrough and verify the finish is even, fully sealed, and consistent at edges, stems, and transitions. You receive care instructions for the first 24-72 hours, return-to-service guidance for vehicles or equipment, and a maintenance plan that fits your space (neutral cleaner, microfiber pads, no harsh degreasers). We also document what was removed, how the slab was profiled, and what coating system was installed, which helps with future touch-ups and warranty clarity. If you need fast turnaround, we can schedule recoating sequences that prioritize cure time, ventilation, and safe re-entry so the floor performs the way it should.
Many garage floors are completed in 1-2 days depending on repairs and the coating system. Cure time varies by product, but light foot traffic is often possible within 12-24 hours, with vehicles typically after 48-72 hours when specified.
We install epoxy base coats with decorative flake or quartz broadcasts, plus polyaspartic or aliphatic urethane topcoats. For demanding commercial areas, we also install urethane cement systems designed for heat, impacts, and chemicals.
Warranty terms depend on the system and site conditions such as moisture and prior coatings. We explain the warranty in writing with the recommended system and care requirements.
Yes. We grind high spots, patch pitting and spalls with compatible repair mortars, and address control joints as needed before coating. Proper repair prevents defects from printing through the finish.
Dry dust mop or vacuum grit regularly, then wet mop with a pH-neutral cleaner. Avoid citrus or harsh degreasers unless approved for the topcoat, and use pads under jack stands or heavy equipment to prevent point-load damage.
Epoxy removal is the make-or-break step when a garage, warehouse, or retail floor starts peeling, chalking, or developing bubbles. Most coating failures happen because the old layer was never fully removed, the concrete was not properly profiled, or moisture and contamination were ignored. Elite Epoxy Bradenton focuses on mechanical removal and proven recoating systems that bond to clean, sound concrete instead of sticking to the problem.
Our process starts by identifying what is on the floor, 100% solids epoxy, water-based epoxy, paint, acrylic sealer, or a failed polyaspartic topcoat, then selecting grinding or shot blasting to remove it efficiently. We aim for a uniform profile (CSP 2-3 for most epoxy coatings, higher when needed for heavy-build or mortar systems) and clean edges with hand tools so the new coating does not lift at the perimeter. Repairs follow, including routing and filling cracks, rebuilding spalls, and addressing control joints with the right flexible or rigid fillers based on movement and use.
Recoating is built around how you use the space. For garages and light commercial floors, a 100% solids epoxy primer and build coat with a full flake broadcast creates a thick, impact-resistant surface, then a polyaspartic or urethane topcoat adds abrasion and chemical resistance. For commercial spaces that need easier cleaning and better traction, quartz or textured topcoats can be applied to dial in slip resistance. We stage the work to manage cure times, ventilation, and return-to-service, so you know when you can walk, move equipment, and drive vehicles back in.
If you are dealing with peeling, delamination, stained concrete, or a coating that never fully hardened, epoxy removal and recoating is often the most cost-effective way to reset the floor correctly. We provide a free written estimate, explain the removal method and coating stack, and set realistic timelines for prep, coating, and cure. The goal is simple, a floor that bonds, wears evenly, and stays easy to clean in Bradenton’s conditions.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Bradenton. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
